Dual TBI EFI System w/Corvair Distributor and Smart Coil

B2203:

2-TBI EFI System w Corvair distributor and Smart Coil:  This kit uses your Corvair modified distributor and a VAG logic coil for a simple and dependable EFI system.  We do NOT provide spark plug wires for this kit as it uses standard Corvair plug wires.  You will need a laptop and cable to program the ECM if you want different parameters than stock.  If you plan to install Air Conditioning, the AC pulley will interfere with the Trigger wheel and will require you send your Harmonic Balancer to us for modification and a special type of trigger wheel.  You will modify your own distributor with the simple instructions provide here (future)

  

Kit Contents

1 ea    Throttle body assembly w/Injector, Idle Advance, Integral MAT and TPS

1 ea    Throttle body assembly w/Injector

1 ea    Fuel Line Right Side

1 ea    Fuel Line Left Side

1 ea    Fuel Line “T” to Tunnel Line

1 ea    “S” Fuel Line from Tank To FPR

1 ea    Fuel Pressure Regulator/Filter

1 ea    Map Sensor, GM Type

1 ea    Narrow Band O2 Sensor

1 ea    Head/Engine Temp Sensor

1 ea    Fuel pump block-off with O-Ring

1 ea    Wiring Harness with Relays 

1 ea    30 amp fuse assembly

1 ea    ECM Computer (programmed and user adjustable)

1 ea    Idle Air Control System

1 ea    USB to 2.5mm ECM to Laptop Cable

1 ea    Smart Ignition Coil

1 ea    Smart Coil to Distributor Plug Wire

1 ea    36-1 Trigger Wheel w/bolts and spacers

1 ea    Trigger Sensor Bracket

1 ea    Trigger Pickup Sensor

2 ea    *Carburetor base core needed

Cores:   Send your cores when you order to allow time for the modifications to these items and avoid delays.  Insure your cores are usable as we need to entire carb to include choke mechanism.  Unusable bases have to be thrown away, wastes your shipping and another set of cores will be needed.  $20.00 each core charge will be charged for unusable cores.
Did you know that Brown EFI is intended for off-road use only?